Product Description
Trijicon RMR / SRO, Holosun 407c / 507c Mount for Savage / Stevens 301 - .410 Models
59539
NEW!
This Mount Fits:
- Savage 301 (Factory Drilled and Tapped .410 only)
- Stevens 301 (Factory Drilled and Tapped .410 only)
Please note: Trijicon recommends the use of a sealing plate to prevent water from entering their red dots.
This Mount DOES NOT Fit:
- Stevens 301 12 Ga & 20 Ga models
Specifications:
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Thickness Above Receiver: .350"
Torque Specs: 15 in/lbs
Mounting Hardware:
(2) 6-32 Flat Head Screws - T10
(2) 8-40 Torx Screws - Requires T10 Wrench or Driver
Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice
Installation Instructions:
- Remove the factory mount
- Install the EGW Sight Mount on the raised interface
- Secure the plate to the barrel of the gun with the provided screws and torque to 20 in/lbs
- Place the red dot sight on the EGW Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided red dot mounting screws
- Torque red dot mounting screws to 15in/lbs
The screws that are included with this mount require a 5/64'' allen wrench for installation.
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts,
materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within ONE DAY!
We are unable to accept returns on used, fitted, or altered parts.
Returns must be in new, unused condition and in their original packaging.
