Product Description
Trijicon RMR / SRO, Holosun 407c / 507c Mount for Novak
49511
NEW!
This Mount Fits (including but not limited to):
Springfield Armory 1911 EMP - 9mm / .40, Springfield Armory 1911 EMP 4" Lightweight Champion - 9mm / .40, Springfield Armory 1911 EMP 4" Conceald Carry Contour Model - 9mm / .40, Springfield Armory 1911 Range Officer Compact - 9mm / .45, Rock Island TCM Rock Standard MS HC Combo - 22TCM/9MMTCM, Rock Island TAC Ultra FS Combo - 22TCM/9MMTCM, Rock Island Ultra CS-LTCM Rock Standard FS HC Combo - 22TCM/9MMROCK, Rock Island TAC Ultra FS HC - 45 ACP, Rock Island TAC Ultra FS HC - 9MM, Rock Island TAC Ultra CS - 9MM, Wilson Combat Tactical Carry Compact, Wilson Combat Tactical Supergrade Compact, Wilson Combat Tactical Carry, Wilson Combat Vickers Elite, Wilson Combat EDC X9, ETC
Minor modification to the sight base may be necessary for some 1911s including Rock Islands, Citadels, and GSG 1911 .22s.
Specifications:
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward).
The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight.
You can take our mount off and replace your rear sight at any time.
Mounting hardware included.
Minor modification may be necessary for Rock Islands.
- Remove the rear sight
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Flat Head Cap Screws - Provided for Trijicon RMR
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Firearms with a traditional Novak cut rear sight.
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts,
materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within ONE DAY!
We are unable to accept returns on used, fitted, or altered parts.
Returns must be in new, unused condition and in their original packaging.
