Product Description
Professional Flash Hole Uniformer Standard 0.080"
UPSTD080
NEW!
For Caliber Range: 22-45 Caliber
Cutter Size: .080″
Shank Length: 3.5″
Cone Diameter: .48″
Hand Loader!
Are you looking for improved accuracy?
Accuracy demands consistency and precision in every operation and component used in hand loading.
The brass case is very important and sometimes important details are overlooked–such as the Primer Pocket and Flash Hole inside of the case.
In cartridge manufacturing, the flash hole is “punched” into the brass.
While this is the least expensive method, it has many shortcomings and inconsistencies.
The flash holes, therefore, are of different sizes and shapes.
The most detrimental to accuracy are the irregular “breakouts” and “burrs” on the inside.
This will cause “shot-to-shot” differences in Primer “Flame Fronts”, causing inconsistent pressure/velocity and, thereby, loss of accuracy.
Bench Rest Shooters have been uniforming flash holes since 1969.
With the Precision K & M UNIFORMER tools, you can realize the potential accuracy by simultaneously reaming, de-burring and chamfering the inside of the flash hole.
The unique features of the K & M Tools provide uniformity with a pre-set depth stop, (Gage), surrounding the tool steel cutter, therefore, does not require the case to be trimmed to a precise or consistent length.
Operation is controlled in reference to inside-bottom of case, not case mouth.
NEVER use these tools in a case with a live Primer De-Cap Case – insert the K & M uniformer through the mouth of the case into the flash hole- grip case, with the base in the palm of hand, while holding the centering cone with thumb and forefinger apply light pressure to lock the cone into the case mouth.
Gently turn the tool. You can feel the work being done.
The cutting will cease when the Pre-set Depth Gage comes in contact with the inside bottom of case.
Each one will feel different as you cut away the burrs and provide the 60° chamfer.
Features:
- Deburrs and chamfers flash holes to improve consistent primer ignition
- Aids in improved handload accuracy
- Pre-set depth stop
- References on inside-bottom of case not case mouth.
5 STAR REVIEWS:
"Used mostly in 223/5.56 with no problems except when the flash hole is WAY too small to punch out the primer, which is not the fault of this de-burring tool. Very happy with it, way more uniform than the RCBS tool that has to be adjusted for each cartridge!"
"Excluding the K&M tool, I have 3 other flash hole deburring tools in my personal inventory and find K&M the most effective and easy to use."
"Purchased the K&M flash hole uniform tool based on the reviews and to see if it would help accuracy. I have a Tikka TX3 and the smallest group I could get from Hornady 147 grain ELD-M bullets at 100 yards was .493 ctc. Different powders made no difference. So I loaded 3 rounds with Staball powder w/o using this flash hole tool. Then I loaded 3 rounds using the flash hole uniform tool and the same load recipe (43.0 grains of Staball). The group w/o measured .493, the same load using the flash hole uniform tool grouped .296 at 100 yards. I did notice a slight reduction in my average velocity, so I bumped up the powder charge just a tad. That group measured .247 (3 shot)."
~~~~~~~~~~~~
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts,
materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within ONE DAY!
We are unable to accept returns on used, fitted, or altered parts.
Returns must be in new, unused condition and in their original packaging.
