Product Description
Micrometer Case Trimmer, Stainless Steel
CTSS-MIC
NEW!
The L.E. Wilson Stainless Steel Case Trimmer with micrometer is unique in that it supports the case body through the trimming operation using holders which simulate a rifle chamber.
Cases are consistently trimmed square and to the desired length.
The trimmer will perform inside neck and primer pocket reaming with optional attachments.
Trimmer will handle cases from 17 caliber to the 45-70.
17 Caliber cases require a separate trimmer (Sold Separately).
Trimmer should be mounted in a vise for use.
Additional features include a positive stop to trim cases to a uniform length and solid construction from Aluminum alloy and steel.
This new model comes with micrometer adjustable head to fine tune case trim length in .001" increments.
It also features a larger stop screw adjustment from the original case trimmer making for a firmer stop and it ships with a polished nickel handle.
Features:
- Micrometer adjustable head fines tunes trim length in .001" increments
- Larger stop screw adjustment
- Polished Nickel Handle
- Handles and Clamps are 304 High Grade Strength Stainless Steel
- Case trimmer supports the case body with cartridge specific case holders (sold separately) which simulates the chamber of the firearm.
Notes:
- Place the case in the Trimmer Case Holder (Not Included), tap the case head on a firm surface, and place in the trimmer. Remove the case by tapping the case mouth. Cartridges with minimal body taper may require different Trimmer Case Holders for fired and new cases. Q-Type Trimmer Case Holders hold the handgun case with an easy to use cross pin. (Trimmer Case Holders are sold separately. Please refer to the chart in our Master Catalog or call for correct case holder application.)
- This trimmer can be held in a bench vise or mounted to an accessory stand. Stands are available separately
5 STAR REVIEWS:
"I get consistent and accuracy within a .001 inch . Trimmed almost 100 brass and never had to tweak. Rock solid consistency. Only negative thing I can say is the loading and use a little slower than other models and the need for collars is a little a pain but if you want rock solid consistency I have not found better In 40 years of reloading."
"After taking the El Cheapo route several times and spending more in total than the LE Wilson Trimmer cost, I got one of these. Easy setup, visible cutter, microadjustable length, etc, all the features I didn't know I would appreciate so much. To me it's worth the 145.99 plus the typically expensive S&H from Midway. Took about five minutes to get comfortable with this very fine tool. Have used it for .223 and 30-06 so far. 6.5 Swede and .303 Brit next. Repeatable trimming, accurate and worth the $$$."
"This is an excellent product! Once you set it up you get the same length every time. The cuts are uniform and require very little chamfering and deburring. The construction is very solid and I can not imagine ever wearing this trimmer out, with the possible exception of the cutting blade itself but after over 1000 rounds trimmed it is still as sharp as it was out of the box. I wish that I had never wasted my money on the cheap ball trimmer that I started with. If you are looking for a brass trimmer this is the one that you want! It is a little pricy but if you buy a cheap trimmer that is what you get and you will end up buying this one down the road."
~~~~~~~~~~~~~~~~~~~
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts,
materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within ONE DAY!
We are unable to accept returns on used, fitted, or altered parts.
Returns must be in new, unused condition and in their original packaging.
