Product Description
Challanger Breech Lock Single Stage Press WITH Ultime 4 Die Set, 2 Quick Change Bushings and 2 Ounce Case Sizing Lube
90588+90600(2)+90738+90006
NEW!
For: 300 Winchester Magnum
Challanger Breech Lock Single Stage Press
90588
he Lee Breech Lock Challenger Press is a great press that is full of features.
Some of these features include a the breech lock quick change die system that holds dies in inserts that allow the reloader to quickly remove them from the press, a steel ram and operating linkage, a very strong "O" frame that is larger than the average press opening giving reloaders maximum hand clearance.
When depriming with the Breech Lock Challenger Press spent primers are sent directly into the trash can helping to keep reloading areas nice and clean.
The press comes with the Lee Lever Prime System allowing primer seating to be done with the reloading press.
Frame Material: Aluminum
Press Type: Single Stage
Priming Feature: YES
Handle Location: Ambidextrous
Number of Mounting Holes: 3
Spent Primer Collection System: YES
Die Bushings Accepted: Standard 7/8"-14
Mounting Hardware Included: NO
Ram Stroke: 3.5 Inches
Frame Design: O-Frame
Ram Diameter: 0.815 Inches
Frame Offset: 30 Degrees
Frame Opening Size: 4.25 Inches
Die Bushing Brand Used: Lee Breech Lock Quick Change Bushings
+
Ultime 4 Die Set
90738
For: 300 Winchester Magnum
Includes:
Collet Neck Sizing Die
Easy Adjust Dead Length Bullet Seating Die
Factory Crimp Die
Full Length Sizing Die
Shellholder
Powder Dipper
Load Data
4 Die Case
Choose the Lee Ultimate Die Set for maximum versatility.
The set features a full length-resizing die to return brass to factory new dimensions, perfect for reloading brass fired in other guns.
The Collet Neck sizing die is used on your fire formed brass giving you best possible accuracy.
The Easy Adjust Dead Length Bullet seating die foolproofs the bullet seating adjustment, and assures perfect seating depth every time.
The Factory Crimp die provides a secure crimp on bullets with or without a crimp groove.
In most cases it helps accuracy by providing a uniform higher start pressure and gives the finished cartridge Factory like accuracy and dependability.
The set is complete, with shell holder, powder measure and famous Lee load data featuring all common brands of powder organized in a easy to read logical format.
Includes a full length sizer, collet neck sizer, Easy Adjust Dead Length Bullet Seating Die & Factory Crimp Die.
Lubricant for sizing die is required (INCLUDED).
Threads: 7/8"-14
+
Breech Lock Quick Change Bushing, 2 PACK
90600
The Lee Breech Lock system allows reloaders to quickly and easily change dies in seconds.
Dies fit inside of the bushing, which allows them to be quickly installed and removed from the press leaving the die setting intact for the next reloading session.
This saves valuable time setting up, and the hassle of resetting your dies during each reloading session.
+
Case Sizing Lube, 2 Ounce Tube
90006
Lee Sizing and Case Lube helps eliminate stuck and dented cases and makes resizing easier.
The formula comes in a plastic tube, is non-sticky, non-allergenic, is pleasant to handle, can be thinned with water and is efficient, a little goes a long way.
Features: Non-sticky, Non-allergenic
Notes: To apply, rub a little lube on your fingers and work it into the brass before the sizing operation.
~~~~~~~~~~~~~~~~~
We are a Factory Direct Dealer of Lee Precision, Inc.
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts,
materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within ONE DAY!
We are unable to accept returns on used, fitted, or altered parts.
Returns must be in new, unused condition and in their original packaging.
