LARGE Case Trimmer Cutter and Lock Stud with Case Length Cause and Shellholder
90401+90018
NEW!
For: 480 Ruger
The Lee Case Trimmer and Cutter is designed to be used with only Lee Case Length Gauges and Shellholders.
This handy tool is made from hardened steel, trimming cases to correct specifications has never been easier.
The shaft on the lock stud allows the setup to be turned by hand or with an electric drill.
Notes:
- Trim length cannot be adjusted as with bench-mounted case trimmers
- Large Cutter and Lock Stud has 1/4" shaft for fitting in a drill and the regular Cutter and Lock Stud has a 3/8" shaft for fitting in a drill
- Large Cutter is designed for all brass with a base diameter over 0.475"
+
Case Length Cause and Shellholder
90018
For: 480 Ruger
The Lee Case Length Gauge is a precise and easy way to trim brass cases to length and square the case mouth. Requires a Lee Cutter and Lock Stud to function.
The first step to successfully trimming brass cases with the Lee Case Length Gauge and Shellholder is to take the Lee Lock Stud and screw it into the shell holder. Next the Length Gauge needs to be screwed into the Case Trimmer Cutter.
The length gauge is set to cut each case within specifications. After the tools are screwed together the next step is case trimming.
Just put the empty brass into the shellholder, insert the case length gauge into the empty piece of brass and turn the cutter until the piece of brass is trimmed to the predetermined length.
It is that easy to get consistent case lengths and square case mouths helping to keep reloaded ammunition as accurate as possible.
Notes:
- The Large Cutter (90401) is required for .475 and larger calibers.
Material: Steel
~~~~~~~~~~~~~~~~~~~~~
We are a Factory Direct Dealer of Lee Precision, Inc.
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts,
materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within ONE DAY!
We are unable to accept returns on used, fitted, or altered parts.
Returns must be in new, unused condition and in their original packaging.
