Full Length Guide Rod Kit, Officer's
25CO
NEW!
For the Following Handgun Types:
1911 Compact, 1911 Officer
The Officers Model pistol is the weapon that benefits most from a Full Length Guide Rod conversion.
After installation, you'll experience improved accuracy and reliability due to its two-piece full length rod.
We swap out the stock plug for a reliable reverse plug with a 24# spring, creating unbelievable performance enhancements which will be noticeable after your first shot!
This kit is designed to be used with the Colt Officers Model or Para Ordnance P12, although minor adjustments to the slide may be required (instructions included).
Unfortunately, these pistols do not have much room for components and thus put immense stress on their recoil springs.
With this in mind, we advise against using SHOK-BUFF Buffers and suggest that you replace your recoil spring every 300 rounds.
- Full-Length Guide Rod conversion designed for Colt Officers Model or Para Ordnance P12 (minor adjustments may be required).
- Reverse plug
- Wrench for installation
- 24# recoil spring
5 STAR REVIEWS:
"This Upgrade makes the Par P12 the pistol it should have been from the factory ,more managable recoil and great folliw up accuracy !!"
"My EDC 1911 Officers Model needed a 'tune-up' and when looking for replacement springs for a King's (out of business) full length recoil spring guide (dual springs) with reverse plug, I discovered that the 0.265 inch diameter guide rod was no longer supported. I found this drop in 0.330 inch 2 piece rod/single spring kit here at Wilson Combat and I am more than pleased with it. Since my slide had already been modified for the Kings Guide rod, this kit was a simple drop in. Absolutely perfect fit. The gun runs smoother and no more ejected brass 'flyers'. Is the gun grouping tighter as others claim theirs is? I'm not sure but just going by how much smoother the gun operates ... the answer is probably yes. Need a new Guide rod for your Colt Officers Model? This is the one to get. Wish I could give it 6 stars."
"This full length guide rod assembly fits PERFECT!!! You only need to mill the slide apron which is simple if you have a mill! If not any gunsmith or machinist can do it. I saw one review stating the guide rod and plug stick out beyond the barrel. This is not true at all. That person must have milled the slide apron wrong and destroyed their pistol. If you mill to 70 thousands of an inch as recommended, it will fit perfectly flush with the barrel bushing. I milled mine 69 thousands of an inch for a mild recess. I am very pleased with this product and highly recommend it above most others on the market! Wilson Combat nailed it with this upgrade!"
~~~~~~~~~~~~~~~~~~~~
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts,
materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within ONE DAY!
We are unable to accept returns on used, fitted, or altered parts.
Returns must be in new, unused condition and in their original packaging.
