Product Description
Street Magic Turn Signal Equalizer
GEN-HD-SS6
NEW!
Fits the Following Harley's: 2010-13 Street Glide & Road Glide Custom
(DRAG PART # 2050-0086)
Does not Fit CVO Models
2014 Street Glides do NOT require a Load Equalizer
Features:
- Fixes rapid blinking of turn signals when using aftermarket LED lights
- Compatible with alarms
- Does not put a significant load on system; produces no heat
- Waterproof slimline design measures 2.4 in. L x 1.4 in. W x .5 in. D
Specifications:
- Alarm Compatible
- No Heat
- No Load
- 100% Waterproof
- 5 Year Manufacturer Warranty
- Dimensions: 4.2" x 0.6" x 1.4"
Installation Instructions:
1. Locate connector block for taillight/turn signals located under left side panel .
2. Unplug main harness connector from fender harness connector.
3. Plug Signal Stabilizer§ in between these two connectors. Mount Signal Stabilizer in secure location.
4. Connect Red wire from Signal Stabilizer to Positive of battery through 3 amp fuse.
5. Attach Black wire with terminal ring from Signal Stabilizers to NEGATIVE of battery.
6. Perform a turn signal synchronization. With the key in the run position and the bike off, press the right turn signal button and allow the turn signal to flash 2 times, after the second flash press the left turn signal button and allow the turn signal to flash 2 times, after the second flash press the right turn signal and allow it to flash at east 10 times.
Turn key off.
7. If there is interference on CB or FM stations on touring bikes, move the black wire from the negative of the battery to the right side grounding stud on the bike's frame directly in front of the battery box.
~~~~~~~~~~~~~~~
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts,
materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within ONE DAY!