Product Description
1911 Firing Pin
10082
NEW, Direct from Factory!
Fits: Springfield EMP pistols
Specifications:
Tip Diameter: .066"
Overall Length: 2.160"
Length Difference: .100" shorter than EGW's standard 2.260" 1911 firing pins
Material: Stainless Steel
Firing Pin Spring: Sold Separately
SKU: 10082
Made In: USA
EMP-SPECIFIC LENGTH:
The Springfield EMP uses a shorter firing pin than a standard 1911.
This firing pin measures 2.160" overall, which is .100" shorter than EGW's standard 2.260" 1911 firing pins. Do not substitute a standard-length firing pin without confirming the requirements of your pistol.
The EGW Springfield EMP Firing Pin is manufactured specifically around the dimensions required by the Springfield EMP pistol.
Unlike EGW's standard 1911 firing pins, which measure 2.260" in overall length, this EMP-specific firing pin measures 2.160".
That makes it exactly .100" shorter to accommodate the EMP's shortened firing system.
The firing pin also features a .066" tip diameter.
Both firing pin diameter and overall length are critical dimensions, so the correct firing pin should always be matched to the specific slide and firing pin channel.
Machined from stainless steel, this firing pin provides a purpose-built replacement for Springfield EMP pistols without requiring the use of a standard-length 1911 firing pin.
Designed Specifically for the Springfield EMP.
The Springfield EMP is not dimensionally identical to a conventional full-size 1911.
Its shortened design required changes to several components, including the firing system.
Because of that difference, firing pin selection should not be based solely on caliber or general 1911 compatibility.
This EGW firing pin is manufactured specifically for the Springfield EMP, with the correct combination of a .066" tip diameter and 2.160" overall length.
NOT A STANDARD-LENGTH 1911 FIRING PIN!
EGW's standard 1911 firing pins measure approximately 2.260" overall.
The Springfield EMP firing pin measures 2.160", making it .100" shorter.
The two should not be treated as interchangeable based on tip diameter alone.
.066" Firing Pin Tip:
This firing pin uses a .066" tip diameter.
The firing pin tip must have the correct relationship with the firing pin opening in the slide.
A pin that is too large can bind, while excessive clearance around a pin that is too small can contribute to primer material flowing into the opening.
For that reason, both tip diameter and overall firing pin length should be verified when replacing a firing pin.
2.160" EMP-Specific Overall Length:
The most important dimensional difference between this pin and EGW's other .066" firing pins is its overall length.
The Springfield EMP firing pin measures 2.160" overall.
For comparison, EGW's standard 1911 firing pins measure approximately 2.260".
The EMP firing pin is therefore .100" shorter.
That dimensional difference is intentional and is what makes this firing pin specific to the Springfield EMP application.
Stainless Steel Construction:
The EGW Springfield EMP firing pin is manufactured from stainless steel.
The part is manufactured to controlled dimensions so the firing pin tip, body, and overall length remain appropriate for the EMP firing pin system.
Why Firing Pin Lenth Matters:
Firing pin length affects how the pin interacts with the firing pin stop, spring, slide, and primer.
A firing pin that is dimensionally incorrect for the pistol may not provide the intended protrusion or movement within the slide.
The Springfield EMP's firing system requires the shorter 2.160" firing pin, which is why a standard 2.260" EGW 1911 firing pin should not automatically be substituted simply because it has the same .066" tip diameter.
Why Choose the EGW Springfield EMP Firing Pin?
- ✔ Designed specifically for Springfield EMP pistols
- ✔ .066" firing pin tip diameter
- ✔ EMP-specific 2.160" overall length
- ✔ .100" shorter than EGW's standard 2.260" 1911 firing pins
- ✔ Stainless steel construction
- ✔ Purpose-built replacement rather than a standard-length substitute
- ✔ Made in the USA by Evolution Gun Works
Installation & Fitment:
Before installation, verify that your pistol requires a .066" firing pin with a 2.160" overall length.
Inspect the firing pin channel, firing pin spring, firing pin stop, and related components for wear, damage, or debris while the firing pin is removed.
After installation, verify that the firing pin moves freely through the slide and returns correctly under spring tension.
The firing pin must also be checked for proper protrusion and clearance before the pistol is returned to service.
Minor fitment may be required due to manufacturing tolerances.
Frequently Asked Questions:
How is this different from EGW's standard 1911 firing pins?
EGW's standard firing pins are approximately 2.260" long. This EMP-specific firing pin measures 2.160", making it .100" shorter.
Can I use a standard 2.260" .066" firing pin instead?
The Springfield EMP uses a shorter firing pin. Use the firing pin dimensions specified for the pistol rather than assuming that two firing pins with the same tip diameter are interchangeable.
What is the firing pin made from?
It is manufactured from stainless steel.
Does the firing pin spring come with it?
No. The firing pin spring is sold separately.
Should I measure my original firing pin?
Yes. When possible, confirm the tip diameter and overall length of the existing firing pin before ordering.
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts,
materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within ONE DAY!
