Product Description
Vortex Viper/Venom (fits Burris FastFire and Docter) Sight Mount For Henry H001 3/8" Dovetail
49261
NEW, Direct from Factory!
This Mount Fits:
- Henry H001 rifles equipped with a 3/8" receiver dovetail
- Browning BL-22
Compatible Red Dots:
Viridian RFX25, Vortex Viper, Vortex Venom (Open Emitter), Burris FastFire, Burris FastFire 2, Burris FastFire 3, Burris FastFire 4, Docter / Noblex sights using the compatible footprint, Primary Arms Classic Mini Reflex Sight, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Sightmark Mini Shot FMS, Sightmark Mini Shot R-Spec, Leica Tempus ASPH, MAKdot S, UTG Reflex Micro Dot, Hawke Reflex Wide, ADE Advanced Optics RD3 models using the Docter footprint
Technical Specifications:
- Firearm Platform: Henry H001
- Rifle Interface: 3/8" Receiver Dovetail
- Optic Footprint: Docter / Burris FastFire / Vortex Viper / Vortex Venom
- Material: 7075 Aluminum
- Finish: Matte Black Type III Hardcoat Anodized
- Overall Length: 1.811"
- Overall Width: 1.1"
- Mounting Hardware: Included
- Made In: USA
Add a modern red dot sight to your Henry H001 rifle without installing a separate Picatinny rail.
This EGW red dot mount is designed to attach directly to the 3/8" receiver dovetail found on compatible Henry H001 rifles and provides the mounting footprint used by the Vortex Venom, Vortex Viper, Burris FastFire, Docter, and other compatible open-emitter optics.
Mounting the optic directly to the receiver dovetail creates a clean, compact setup and avoids the additional height, weight, and extra connections created by stacking an optic adapter on top of a separate rail.
Keeping the optic lower and closer to the receiver can provide a more natural sight picture and better complement the lightweight handling characteristics of the Henry H001 platform.
Precision machined from 7075 aluminum and finished with a matte black Type III hardcoat anodized coating, this mount provides a durable, lightweight interface between the rifle and optic.
The streamlined design is well suited for recreational shooting, small-game hunting, training, and general range use.
A red dot sight provides a single aiming point without requiring the shooter to align a traditional front and rear sight.
This can make target acquisition faster and allow the shooter to maintain greater awareness while aiming with both eyes open.
Due to manufacturing tolerances between firearms, minor fitting may be required.
Why Choose this EGW Mount?
- ✔ Attaches directly to the Henry H001 3/8" receiver dovetail
- ✔ Eliminates the need for a separate Picatinny rail and optic adapter
- ✔ Keeps the optic lower and closer to the receiver
- ✔ Precision machined from durable 7075 aluminum
- ✔ Matte black Type III hardcoat anodized finish
- ✔ Compatible with many popular Docter footprint optics
- ✔ Mounting hardware included
- ✔ Made in the USA
Mountain Hardware Included!
This mount includes the application-specific hardware required to secure the mount to the Henry H001 receiver dovetail and the appropriate optic mounting screws supplied for compatible Docter footprint red dots.
2PCS 6-32 X 3/8” FLAT HEAD CAP SCREW
2PCS 6-32 X 5/16 BUTTON HEAD SCREWS
The exact optic mounting screws used will depend on the red dot model.
Always verify that the optic sits completely flat and that the screws provide sufficient thread engagement without bottoming out.
Installation Instructions:
- Unload the rifle and verify that the chamber and magazine are empty.
- Clean the receiver dovetail and the mating surfaces of the mount to remove oil, dirt, and debris.
- Loosen the dovetail mounting hardware enough to position the mount on the receiver.
- Place the mount at the desired location on the Henry H001 3/8" dovetail.
- Tighten the dovetail mounting hardware evenly so the mount remains level and securely clamped.
- Place the red dot sight onto the EGW mount and verify that it sits completely flat.
- Apply a small amount of blue thread-locking compound to the optic mounting screws when recommended by the optic manufacturer.
- Tighten the optic mounting screws evenly according to the optic manufacturer's recommended torque specification.
- Confirm that the mount and optic are secure before sighting in or firing the rifle.
Fitment Notes:
This mount is designed specifically for the Henry H001 3/8" receiver dovetail.
It does not attach to a Picatinny rail and should not be installed on a Weaver or other rail system.
The mount should clamp securely and remain level without excessive force or visible movement.
Optic screw requirements may vary between manufacturers and models.
Verify screw length and thread engagement before applying final torque.
Frequently Asked Questions:
Does this mount fit a Picatinny rail?
No. This mount is designed to attach directly to the 3/8" receiver dovetail on compatible Henry H001 rifles.
Will this fit the Vortex Venom Enclosed?
No. This mount fits the original Vortex Venom open-emitter optic. The Vortex Venom Enclosed uses a different mounting footprint.
Will this fit a Holosun 407C or 507C?
No. The Holosun 407C and 507C use the Trijicon RMR footprint and require the correct RMR-footprint Henry H001 mount.
Are mounting screws included?
Yes. The mount includes application-specific mounting hardware. Always verify optic screw length before final installation.
Does this mount require fitting?
Due to manufacturing tolerances between firearms, minor fitting may be required.
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts,
materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within ONE DAY!
