Street Magic
6 Pin Signal Stabilizer
with Radio Frequency ShieldingGEN-HD-SS6 by Custom Dynamics
(DRAG PART # 2050-0086)
Fits Harley Davidson 2010-13 Street Glide/Road Glide Custom
- (Does not Fit CVO Models)
- (2014 Street Glides do NOT require a Load Equalizer)
5 Year Manufacture Warranty
- Alarm Compatible, No Heat, No Load, 100% Waterproof
- 5 Year Manufacture Warranty
- Dimensions: 4.2" x 0.6" x 1.4"
- Plug and Play on:
Harley Davidson
2010-2013 Street Glide
2010§2011 Touring Street Glide Trike
2010-2013 Road Glide Custom
2010§2011 Touring Street Glide Trike
2010-2013 Road Glide Custom
Installation Instructions
1. Locate connector block for taillight/turn signals located under left side panel .
2. Unplug main harness connector from fender harness connector.
3. Plug Signal Stabilizer§ in between these two connectors. Mount Signal Stabilizer in secure location.
4. Connect Red wire from Signal Stabilizer to Positive of battery through 3 amp fuse.
5. Attach Black wire with terminal ring from Signal Stabilizer§ to NEGATIVE of battery.
6. Perform a turn signal synchronization. With the key in the run position and the bike off, press the right
turn signal button and allow the turn signal to flash 2 times, after the second flash press the left turn signal
button and allow the turn signal to flash 2 times, after the second flash press the right turn signal and allow it
to flash at east 10 times. Turn key off.
7. If there is interference on CB or FM stations on touring bikes, move the black wire from the negative of
the battery to the right side grounding stud on the bike's frame directly in front of the battery box.
2. Unplug main harness connector from fender harness connector.
3. Plug Signal Stabilizer§ in between these two connectors. Mount Signal Stabilizer in secure location.
4. Connect Red wire from Signal Stabilizer to Positive of battery through 3 amp fuse.
5. Attach Black wire with terminal ring from Signal Stabilizer§ to NEGATIVE of battery.
6. Perform a turn signal synchronization. With the key in the run position and the bike off, press the right
turn signal button and allow the turn signal to flash 2 times, after the second flash press the left turn signal
button and allow the turn signal to flash 2 times, after the second flash press the right turn signal and allow it
to flash at east 10 times. Turn key off.
7. If there is interference on CB or FM stations on touring bikes, move the black wire from the negative of
the battery to the right side grounding stud on the bike's frame directly in front of the battery box.
We are a Factory Direct Dealer of Custom Dynamics, Inc.
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all
of the parts, materials and documentation.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WE WILL CONSOLIDATE AND REDUCE SHIPPING CHARGES, IF YOU ORDER MORE THAN ONE ITEM FROM US.
DO NOT HIT "Buy it Now", but rather "Add to Cart",
Then select "Request Total from Seller" or send us a note.
WE DO NOT CHARGE A HANDLING FEE, OUR SHIPPING COST IS YOUR SHIPPING COST!
ALL SHIPMENTS ARE INSURED!
We are unable to accept returns on used, fitted, or altered parts.
Returns must be in new, unused condition and in their original packaging.