L. E. Wilson Chamber Type
Inline Seater Die
For:
7mm PRC
BS70-PRC
The LE Wilson Chamber Type Seater Die
is noted for precise accuracy.
Both the bullet and case are firmly held in perfect alignment
as the bullet is seated in the case.
Hand-die design for use with a mallet or an arbor press.
Not for use on a conventional press.
A favorite among benchrest shooters.
A chamber type bull*et seater positively controls
both bull*et and cartridge case alignment.
The case and bull*et are completely captured by the die prior to the
bull*et being pushed straight into the case by a close-fitting seating stem.
This style of bull*et seater works more accurately
than a conventional (7/8"-14 TPI) bull*et seating die.
Seating depth adjustments are made by turning the screw inside the cap (3/8" - 24 TPI).
This is one of the most accurate bullet seaters ever made.
Notes:
- Die positively controls both bullet and cartridge case alignment.
- Bullet is pushed into the case mouth by a close-fitting bullet seating stem (drift).
- This die works in an Arbor or hand press only.
L E Wilson also makes seating stems (their term "drifts")
for VLD ( Very Low Drag ) type bullets which drop in to these dies.
~~~~~~~~~~~~~~~~~~
We are unable to accept returns on used, fitted, or altered parts.
Returns must be in new, unused condition and in their original packaging.
