Product Description
Model 1400-XT Case Trimming Lathe, TiN (Titanium Nitride) Cutter
14000
NEW!
Features:
- Cast iron frame to last a lifetime
- Universal collet fits all popular cases
- TiN (Titanium Nitride) coated replaceable cutter
- Coarse and fine adjustment for case lengths
- Storage holes for pilots
The Model #1400-XT Case Trimming Lathe uses a cast iron frame that has been extended to handle all the latest long action cartridges.
The frame is cast iron because it is a perfect bearing surface, will not wear out and will maintain its precision and alignment for years of service.
Collets Used: Yes, Universal Collet that fits all popular cartridge cases
Pilots Used: Redding
Pilots Included: Yes, 22 Caliber, 6mm, 6.5mm, 270 Caliber, 7mm and 30 Caliber
Includes: 6 Pilots, Universal Collet, 2 neck cleaning brushes (For 22-30 caliber cases) and 2 primer pocket cleaners (Large and Small)
Features: Titanium Nitride Coated Replaceable Cutter Head
Mounting:
The Model No. 1400 Case Trimming Lathe should be rigidly mounted to a bench top or other solid work surface by means of the two holes in the base.
The trimmer may be mounted parallel to the front edge of the bench, or at any angle to it, according to the preference of the operator.
An alternative mounting method is to use a Redding Double “C” Clamp (Part #30520, NOT INCLUDED).
The clamp accommodates bench tops up to 2-1/4” think and allows easy removal of the trimmer when not in use.
Universal Collet:
The Universal Collet has a series of steps that accept all popular cartridge cases.
To operate the collet:
• Grasp the handle and withdraw the spindle so that the protruding lock pin enters the slot in the frame.
• Release any tension on the collet by rotating the handle counterclockwise.
Counterclockwise rotation will open the collet.
Clockwise rotation will close the collet.
Important: Do not close the collet when it is empty - it may be permanently damaged by overstressing.
Case Length Adjustment:
Cases must be resized, and the necks properly expanded before trimming.
This ensures proper fit of the pilots and avoids additional length changes that may occur during sizing.
Once the case is placed into the collet:
1. Turn the handle clockwise until the collet closes securely on the cartridge case rim.
2. Slide the handle and spindle fully forward. This moves the lock pin out of the slot in the frame allowing
the spindle to be rotated.
3. While holding the spindle in this fully forward position, loosen the cutter shaft and slide the pilot into
the case mouth until the TiN cutter makes contact with the case.
4. Lock the cutter shaft in this position with the set screw.
5. Fine adjustments for length may now be made by rotating the lock ring on the handle.
Deburring:
Deburring the inside and outside of the case mouth after trimming is very important.
The small chamfers created help ensure accurate case sizing and proper bullet seating.
Deburring is easily and properly accomplished with a quick twist of the Redding Deburring Tool (Part #09000).
Lubrication:
A light periodic oiling of the spindle will keep it functioning smoothly.
The frame is made of cast iron, a natural bearing surface, so you never have to worry about wear and galling.
Accessories:
Included with your trimmer are large and small primer pocket cleaners and two case neck cleaning brushes.
Threaded holes are provided on the trimmer frame to mount the primer pocket cleaners and one of the
brushes.
5 STAR REVIEWS:
"Reloading for competition shooting is what I wanted this case trimmer for. It is straight forward to use and very consistent and precise every time. I highly recommend this case trimmer."
"Liked the first one so much I had to have two. One for 5.56 and one for 7.62."
"I use this exclusively to trim 308 brass and I've had it for years. Works perfectly and consistantly. Never had to adjust it. I only wish the cutting did the deburring as well."
~~~~~~~~~
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts,
materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within ONE DAY!
We are unable to accept returns on used, fitted, or altered parts.
Returns must be in new, unused condition and in their original packaging.
