Product Description
1911 Double Stack Slide Stop 9mm (.200" Pin) Blued
11014
NEW, Direct from Factory!
For: 9mm
Technical Specifications:
- Platform: Double-Stack 1911 / 2011-Style
- Caliber: 9mm
- Component: Slide Stop
- Pin Diameter: .200"
- Pin End: Flat / Faced-Off
- Paddle: EGW Ridge Pattern
- Material: Carbon Steel Bar Stock
- Manufacturing: Machined From Solid
- Finish: Blued
- Installation: Minor Fitting May Be Required
The EGW Double Stack 1911 Slide Stop for 9mm was designed specifically for modern double-stack 1911 and 2011-style pistols.
Rather than simply adapting a traditional single-stack slide stop, EGW developed this component around the geometry and styling commonly used on modern double-stack 1911 platforms.
The slide stop uses a .200" diameter pin with a flat, faced-off end.
Instead of ending in a rounded or domed profile, the exposed end of the pin is machined flat for a cleaner appearance on the opposite side of the frame.
On the control side, this slide stop uses the same paddle design as the EGW Ridge Slide Stop.
The raised Ridge pattern provides a positive textured surface for thumb engagement while maintaining a clean, compact profile.
The entire component is machined from solid carbon steel bar stock and finished in blue for a traditional dark appearance that pairs well with blued frames and other dark-finished controls.
Designed Specifically for the Double-Stack 1911s.
Modern double-stack 1911 and 2011-style pistols can differ from traditional single-stack 1911s in frame geometry, component dimensions, and exterior styling.
EGW designed this slide stop specifically for the double-stack 9mm platform rather than treating it as a generic 1911 replacement part.
The result is a purpose-built slide stop with a .200" pin, a flat-faced pin end, and the same Ridge paddle design used on EGW's standard Ridge Slide Stops.
.200" Flat-Faced Slide Stop Pin.
One of the defining features of this slide stop is its .200" diameter pin.
On many traditional 1911 slide stops, the exposed end of the pin is rounded or domed.
On the EGW Double Stack Slide Stop, the pin is faced off flat.
This creates a flatter, cleaner appearance on the opposite side of the frame and better matches the styling commonly found on modern double-stack 1911 builds.
Same Paddle as the EGW Ridge Slide Stop.
The exterior control paddle uses the same design found on the EGW Ridge Slide Stop.
The raised Ridge pattern provides a defined textured surface for thumb engagement when manually locking or releasing the slide without requiring an oversized competition-style extension.
For builds already using other EGW controls, the Ridge paddle also helps maintain a consistent appearance across the pistol.
Machined From Solid Carbon Steel.
The EGW Double Stack Slide Stop is machined from solid carbon steel bar stock.
Machining the component from solid material allows EGW to maintain control over important dimensions throughout the part, including the .200" pin, internal lug geometry, and exterior paddle.
After machining, the component receives a blued finish for a traditional dark appearance that pairs well with blued frames, thumb safeties, and other 1911 controls.
Why Choose the EGW Double Stack 9mm Slide Stop?
- ✔ Designed specifically for double-stack 1911 / 2011-style pistols
- ✔ Designed for 9mm applications
- ✔ .200" diameter slide stop pin
- ✔ Flat, faced-off pin end instead of a rounded or domed end
- ✔ Same paddle design as the EGW Ridge Slide Stop
- ✔ Positive textured thumb engagement
- ✔ Machined from solid carbon steel bar stock
- ✔ Traditional blued finish
- ✔ Purpose-built for modern double-stack 1911 builds
- ✔ Manufactured by Evolution Gun Works
Installation & Fitment:
This slide stop is designed around double-stack 1911 / 2011-style pistols chambered in 9mm.
However, frame dimensions, barrel links, magazines, and related components can vary between manufacturers.
Minor fitting may be required to achieve proper operation in the individual pistol.
After installation, verify proper pin fit, barrel link movement, slide travel, magazine follower engagement, plunger engagement, slide lockback, and complete firearm function.
Frequently Asked Questions:
What type of pistol is this slide stop designed for?
This slide stop was developed specifically for double-stack 1911 and 2011-style pistols chambered in 9mm.
What caliber is this version for?
This version is specifically designed for 9mm.
What is the pin diameter?
The slide stop uses a .200" diameter pin.
What does flat-faced pin mean?
The exposed end of the slide stop pin is faced off flat rather than finished with the rounded or domed profile found on many traditional 1911 slide stops.
Does it use the same paddle as the EGW Ridge Slide Stop?
Yes. The exterior control paddle uses the same Ridge pattern as the EGW Ridge Slide Stop.
What is the slide stop made from?
It is machined from solid carbon steel bar stock.
What finish does it have?
This version has a traditional blued finish.
Is this intended for single-stack 1911s?
This model was developed specifically for double-stack 1911 / 2011-style pistols. Use the appropriate EGW slide stop for your specific platform and caliber.
Does EGW offer this with a smooth paddle?
No. This version uses the EGW Ridge paddle.
Will this require fitting?
Minor fitting may be required because double-stack 1911 frames, barrel links, magazines, and related components can vary between manufacturers.
ALL MANUFACTURERS WARRANTIES WILL APPLY !
All of our products are BRAND NEW in the box; and contain all of the parts,
materials and documentation.
You can expect and will receive prompt delivery of your item.
We will ship your order within ONE DAY!
